NETGEAR DGFV338 Wireless ADSL Router Firmware 3.0.5-24

Open Drivers | Update | Search | Archive | Driver Request | Bookmark

Search:

Download Vendor

>> Driver Brief >>

>> Advertisement >>

>> Driver Download >>

>> Driver Summary >>

NETGEAR DGFV338 Wireless ADSL Router Firmware 3.0.5-24.

This release comprises the main firmware is 3.0.5-24 & the DSL firmware is 2.00.62 for both Annex A & Annex B countries.

Important Note:

Just before upgrading, we recommend to reboot the unit.

Note: We recommend that you reset to “Set Factory Defaults” before upgrading and start clean, but this is not mandatory.

Reboot & Update the Main (router) firmware first, Then, reboot the system

Finally, update the DSL (daughter board) firmware.

New Features & Bug Fixes:

2-Factor authentication support (WIKID)

SIP ALG support

Resolved the issue with WAN port changes in IKE policy when used with mode config policy

Resolved DGFV338 intermittent disconnections on ISP Enta.net

Resolved the issue with Traffic Counter not resetting on the correct time

Resolved the issue that SNMP fails to function after soft reboot using NETGEAR ProSafe NMS100

Modified the Warning message when upgrade fails with invalid image

Updated the DGFV338 https certificate which had expired

Resolved Pre-shared VPN key or wireless passphrase changes to “*******” at random times.

Support for % in username for PPPoE connections

.

>> Product Information and Specification >>

VPN, Wireless Access Point, Firewall, Router, Switch and ADSL2+ modem.

This comprehensive and affordable solution offers wired, wireless connectivity with businessclass protection for small office and remote/branch office users. It combines six functions in a single, compact package – Stateful Packet Inspection (SPI) firewall, 802.11g wireless access point, IPSec Virtual Private Network (VPN), NAT router, an eight port 10/100 fast ethernet switch and built-in ADSL2+ modem support.


Easy and relliable, the DGFV338 delivers both 10 and 100 Mbps connections for wired devices, plus wireless support at 2.4 Ghz frequency at 54 Mbps radio transmission with up to 108 Mbps in 802.11g (region specific).

More than just a simple NAT router, the ProSafe DGFV338 SPI firewall provides business-class protection, blocking unwanted users from accessing the network. Support for Wi-Fi Protected Access 2 Enterprise (WPA2) shields wireless communication with the highest available level of industry-standard encryption and authentication. Comprehensive controls block or filter unwanted addresses, services, protocols, and URLs, fortifying your network. Up to fifty simultaneous IPSec VPN connections protect links between business locations, encrypting all traffic as it traverses the Internet.


Ideal Solution for Telecommuters and Remote Offices. The DGFV338 is easy to set up. It delivers all the advantages of centralized administration for remote offices, teleworkers and small businesses, including dynamic DNS capabilities. Providing support for ADSL2+, the DGFV338 also supports an Ethernet WAN port for failover on non- ADSL connections. The ProSafe DGFV338 is the all-in-one solution for all your small to mid-sized business needs.

>> NETGEAR Updated and Latest Drivers >>

>> NETGEAR Network Driver Sponsored Links >>