Pentax Optio A20 Camera Firmware 1.01 Windows

Custom Search
Run a free scan for all outdated drivers( included Pentax drivers)
Pentax Optio A20 Camera Firmware 1.01 Windows was presented for free download to install, add, update, setup Pentax Cameras and MP3 Player. please check your digital device manufacturer Pentax, device category Cameras and MP3 Player, device model, operating system, driver version according to Pentax Optio A20 Camera Firmware 1.01 Windows.

Pentax Optio A20 Camera Firmware 1.01 Windows

>> Driver Brief >>

Version:
1.01
Release:
15 Mar 2007
Update:
19 Mar 2007
License:
Free Driver
File Name:
a2_e101w.exe
File Size:
4.06 Mb
Environment:
Windows OS
Category:
Cameras and MP3 Player Drivers
Vendor:
Pentax Drivers
Subcategory:
Pentax Cameras and MP3 Player Drivers

>> Advertisement >>

>> Driver Download >>

>> Driver Summary >>

Pentax Optio A20 Camera Firmware 1.01 Windows.

Version 1.01:

  • Added compatability with high capacity SDHC memory cards.

    PREPARATION:

  • You will need a blank, formatted memory card with a capacity of 16MB or higher.
  • You will need your camera's USB cable, or a memory card reader.
  • Make sure your battery is fully charged, or that you are using an optional AC adapter to prevent power interruptions during the update process.
  • Make sure your camera currently has firmware version 1.00. Before starting the update, you can check your current firmware version by turning the camera on while holding down the MENU button.

    FIRMWARE UPDATE INSTRUCTIONS - WINDOWS:

  • Click the Windows link below to download the self-extracting firmware archive file (a2_e101w.exe). Click SAVE to save the download file to your computer's hard drive. Saving it to your desktop, for example, will make it easy to find after the download is complete. Please note: this download file is not the firmware update file itself, but a compressed archive that must be expanded in the following step.
  • Next, double click the download file to expand it. Once expanded, you will see a readme text file (README.TXT) and the firmware update file itself (FWDC160P.ELF). The readme file contains instructions similar to what you are reading on this page.
  • You must now copy the firmware update file (FWDC160P.ELF) to your camera's memory card. When you connect the camera directly to your computer (or if you use a card reader), the memory card appears as a removable disk drive in the My Computer window. Make sure you are using a blank/formatted memory card, then drag & drop (or copy & paste) the firmware update file (FWDC160P.ELF) from the desktop to your removable disk window, which is the camera's memory card. Please note: You must put the firmware update file (FWDC160P.ELF) directly onto the removable disk; it cannot be in any sub-folders. It must be on the top (or root) level of the removable disk.
  • Now that you have copied the firmware update file (FWDC160P.ELF) to your camera's memory card, you are ready to install it. Make sure your camera is turned off and disconnected from the computer. Make sure that the memory card containing the firmware update file is inserted into your camera. Also, make sure you that you have adequate power in your camera. We recommend you use a Pentax AC adapter to perform the firmware update, but if you do not have a Pentax AC adapter, make certain that your battery has a full charge.
  • To begin the update, turn your camera on while holding down the MENU button. If you have followed the above instructions precisely, the camera will begin to load the new firmware. You will see the message "NOW LOADING" then the camera will display the firmware update menu.
  • Select "YES" using your camera's 4-way controller (the default is "NO") then press your camera's OK button.
  • The camera will now update its firmware. This may take a couple of minutes, so be careful to not interrupt the process.
  • When the update is complete, you will see "COMPLETE" on your camera's LCD screen. Turn the camera off and remove the memory card.
  • With the memory card removed from the camera, check your new firmware version by turning the camera back on while holding down the MENU button. Before you begin to take pictures again, be sure to format your memory card to erase the firmware update file.

    • .

    >> Driver Install Instruction >>

    1. Define your Pentax Cameras and MP3 Player device model.
    2. Define your operating system to install your Pentax Cameras and MP3 Player device
    3. Search Cameras and MP3 Player driver category
    4. Find Pentax Cameras and MP3 Player driver
    5. Select Pentax Optio A20 Camera Firmware 1.01 Windows
    6. Download Pentax Optio A20 Camera Firmware 1.01 Windows
    7. Install Pentax Optio A20 Camera Firmware 1.01 Windows
    8. Restart or reboot your computer to finish your driver installation.

    >> Driver Download Statement >>

    Opendrivers.com help you understand that opendrivers.com accepts no responsiblility for the driver, Pentax Optio A20 Camera Firmware 1.01 Windows you will download in the site. we cannot guarantee you can download the full right driver from the driver download link and get the completely right information descriped above.

    >> Pentax Cameras and MP3 Player Driver Sponsored Links >>

    Pentax Optio A20 Camera Firmware 1.01 Windows