US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8

Run a free scan for all outdated drivers( included US Robotics drivers)
US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8 was presented for free download to install, add, update, setup US Robotics Network. please check your digital device manufacturer US Robotics, device category Network, device model, operating system, driver version according to US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8.

US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8

>> Driver Brief >>

Version:
3.93.35.0.8
Release:
30 Oct 2006
Update:
12 Dec 2006
License:
Free Driver
File Name:
USR5461-v3.93.35.0.8.usr
File Size:
1.36 Mb
Environment:
Firmware
Category:
Network Drivers
Vendor:
US Robotics Drivers
Subcategory:
US Robotics Network Drivers

>> Advertisement >>

>> Driver Download >>

>> Driver Summary >>

US Robotics USR805461/USR015461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8.

This firmware fixes the following issues:

  • DST (Daylight Saving time) Firewall issue with how IAC (Internet Access Control) works.
  • PPPoE server disconnect/reconnect
  • PPPoE inactivity timer
  • PPTP client disconnect/reconnect
  • backup/restore settings

    Before Upgrading from version 3.91.37.0.3 ONLY:

  • With a thin tool, such as a paper clip, briefly press the RESET button on the back of the router.
  • Wait about 30 seconds.

    Important: To ensure a successful upgrade, please perform the firmware upgrade from a client that is physically wired to the router. A wireless client may become disassociated from the router during the upgrade process resulting in an incomplete upgrade.

  • Download this file to a temporary location on your computer's hard disk drive.
  • To upgrade your USRobotics Wireless MAXg Router with all operating systems, open an Internet browser and enter the router's IP address. The default IP address of the router is 192.168.2.1
  • Enter your User name and Password. Click OK.
  • Click Device in the main menu.
  • Under the "Upgrade Router" section, enter the location of the USR5461-v3.93.35.0.8.usr file in the text box, or click the Browse button to search for the file. Then click the Upgrade button to begin the upgrade process.
  • When the upgrade process is complete, the router will reboot. To re-establish a connection with your router, wait approximately 15 seconds and click Continue.

    • .

    >> Driver Install Instruction >>

    1. Define your US Robotics Network device model.
    2. Define your operating system to install your US Robotics Network device
    3. Search Network driver category
    4. Find US Robotics Network driver
    5. Select US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8
    6. Download US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8
    7. Install US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8
    8. Restart or reboot your computer to finish your driver installation.

    >> Driver Download Statement >>

    Opendrivers.com help you understand that opendrivers.com accepts no responsiblility for the driver, US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8 you will download in the site. we cannot guarantee you can download the full right driver from the driver download link and get the completely right information descriped above.

    >> US Robotics Network Driver Sponsored Links >>

    US Robotics USR5461 802.11g Wireless MAXg Router Firmware 3.93.35.0.8