Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24

Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24 was presented for free download to install, add, update, setup Linksys Network. please check your digital device manufacturer Linksys, device category Network, device model, operating system, driver version according to Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24.

Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24

>> Driver Brief >>

Version:
1.0.24
Release:
1 Dec 2006
Update:
11 Dec 2006
License:
Free Driver
File Name:
WRV200+Firmware+1.0.24.zip
File Size:
3.55 Mb
Environment:
Firmware
Category:
Network Drivers
Vendor:
Linksys Drivers
Subcategory:
Linksys Network Drivers

>> Advertisement >>

>> Driver Download >>

>> Driver Summary >>

Linksys WRV200 Wireless-G VPN Router with RangeBooster Firmware 1.0.24.

New Enhancements:

  • 1. With remote management enabled, if a user makes three unsuccessful logon attempts, WRV200 will block the user's IP address for 180 seconds.
  • 2. Add a configurable NTP Server in Setup->Time Setting.
  • 3. Add a SNMP through IPSec Tunnel feature in VPN->IPSec VPN->Global Options.
  • 4. Add two syslog messages, "WRV200 system restart" for system reboot and "WRV200 start user-called FACTORY DEFAULT procedure" for reset to factory default.

    Issues Fixed:

  • 1. Fixed the issue that IPSec tunnels cannot be established when the WAN connection type is PPPoE. This issue was found only on firmware 1.0.20.
  • 2. Fixed the issue that router may unexpectedly reboot when all traffic is coming from/to wireless hosts and there is a VPN tunnel with steady traffic.
  • 3. Stealth all ports on the firewall when DoS Prevention is enabled.
  • 4. PPTP (WAN connection type) will not work when the PPTP Server IP and the Default Gateway are different in the configuration.
  • 5. Fixed an issue that when PPTP is "Connect on Demand" and PPTP connection disconnects due to idle timeout, WRV200 does not try to re-establish the PPTP connection.
  • 6. Improved the clock accuracy by synchronizing the time with NTP Server periodically.
  • 7. Fixed an issue that the same DNS server was displayed in the Status->Router page with PPPoE WAN connection.

    Known Issues:

  • 1. If Syslog is enabled and the WAN connection is up, the Web UI may crash randomly.
  • 2. IPSec tunnels do not pass NetBIOS Broadcast packets. This may create a problem when users want to search computers by names or to browse the network neighborhood on Windows Explorer. Users can use a LMHOSTS file to work around this issue. More information can be found at http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/cnet/cnfd_lmh_qxqq.mspx?mfr=true

    • .

    >> Driver Install Instruction >>

    1. Define your Linksys Network device model.
    2. Define your operating system to install your Linksys Network device
    3. Search Network driver category
    4. Find Linksys Network driver
    5. Select Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24
    6. Download Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24
    7. Install Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24
    8. Restart or reboot your computer to finish your driver installation.

    >> Driver Download Statement >>

    Opendrivers.com help you understand that opendrivers.com accepts no responsiblility for the driver, Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24 you will download in the site. we cannot guarantee you can download the full right driver from the driver download link and get the completely right information descriped above.

    >> Linksys Network Driver Sponsored Links >>

    Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24