HP DVD Writer dvd300i Firmware 3.00 (300n drive version)

Custom Search
Run a free scan for all outdated drivers( included HP drivers)
HP DVD Writer dvd300i Firmware 3.00 (300n drive version) was presented for free download to install, add, update, setup HP CD-ROM. please check your digital device manufacturer HP, device category CD-ROM, device model, operating system, driver version according to HP DVD Writer dvd300i Firmware 3.00 (300n drive version).

HP DVD Writer dvd300i Firmware 3.00 (300n drive version)

>> Driver Brief >>

Version:
3.00
Release:
2 Nov 2003
Update:
21 Feb 2004
License:
Free Driver
File Name:
dvd300n_300.exe
Environment:
Windows 95/ 98/ ME/ NT4.0/ 2000/ XP
Category:
CD-ROM Drivers
Vendor:
HP Drivers
Subcategory:
HP CD-ROM Drivers

>> Advertisement >>

>> Driver Download >>

>> Driver Summary >>

Description: 
The upgrade includes the following features:
  • New laser write strategies for 8x DVD+R, 4x DVD+R and 4x DVD+RW media.
    • The firmware update will NOT allow the DVD300 drive to write at 8x speeds. The DVD300's maximum recording speed is 4x no matter what recordable DVD media is utilized.
  • Further support of black CD-R media.
  • Improvement in readability of certain DVD+RW media.
  • Improved strategies to increase the number of writes to DVD+RW and CD-RW media.
  • Other general errors resolved.

Before Running the Update:
The RecordNow software included on the DVD300 installation disc must be installed for the firmware update to operate successfully. Install RecordNow before running this update.
DVD300e Owners: The DVD300e must be attached to a USB 1.1 or USB 2.0 port during the upgrade process. The firmware update will not function correctly if the DVD300e is on an IEEE-1394 port. After the firmware update, the DVD300e can be re-attached to the IEEE-1394 port.

Instructions:
Download the dvd300n_300.exe file to the computer containing the DVD300 drive. Once the file is fully downloaded, double-click the dvd300n_300.exe file to install and initiate the firmware update. Follow the on-screen directions to complete the DVD300 firmware update.

Reminder:
The DVD300 must have the power cycled off after the firmware update. Reset the DVD300i by shutting down and turning off the computer. Reset the DVD300e by shutting down the computer and manually unplugging, then re-plugging in the power cable into the back of the drive. Restart the computer after power has been cycled. Failure to cycle power may result in the DVD300 temporarily malfunctioning.

Not sure which firmware to download?

.

>> Driver Install Instruction >>

1. Define your HP CD-ROM device model.
2. Define your operating system to install your HP CD-ROM device
3. Search CD-ROM driver category
4. Find HP CD-ROM driver
5. Select HP DVD Writer dvd300i Firmware 3.00 (300n drive version)
6. Download HP DVD Writer dvd300i Firmware 3.00 (300n drive version)
7. Install HP DVD Writer dvd300i Firmware 3.00 (300n drive version)
8. Restart or reboot your computer to finish your driver installation.

>> Driver Download Statement >>

Opendrivers.com help you understand that opendrivers.com accepts no responsiblility for the driver, HP DVD Writer dvd300i Firmware 3.00 (300n drive version) you will download in the site. we cannot guarantee you can download the full right driver from the driver download link and get the completely right information descriped above.

>> HP CD-ROM Driver Sponsored Links >>

HP DVD Writer dvd300i Firmware 3.00 (300n drive version)